Prismatic dial

SteveHarris

Administrator
Staff member
Enicaristi
Sherpa
Hi Sam,

I'm not sure to which model you're referring. I don't recall any with a prismatic dial.

Thanks,

Steve
 

Sam Lawrence

New member
Sherpa

Sam Lawrence

New member
Sherpa
Hi Sam, what info are you looking for? Size, colours or perhaps position of the pins? Then maybe I can help, I have a few of these pixelled dials from old stock.
Hi Jim,

I have two projects that I might put one in. One is an Ocean Pearl case that fits a 11.75’’’ ligne movementI (have not Purchased the movement yet). The dial will need to be 27.3mm to 28.8mm. The other is for a similar case that I have not yet received, so no measurements yet. Preferred colors are red or blue. I don’t now what to do about the posts.
 

Cardon

New member
Sherpa
Hi Jim,

I have two projects that I might put one in. One is an Ocean Pearl case that fits a 11.75’’’ ligne movementI (have not Purchased the movement yet). The dial will need to be 27.3mm to 28.8mm. The other is for a similar case that I have not yet received, so no measurements yet. Preferred colors are red or blue. I don’t now what to do about the posts.
Hi Sam, found my dials and made some Pics, and measured. Interesting fact is that there are flat dials and also some that are slightly curved !!
Both types I own are +/- 29mm
As far as I have the pixelled dials there came in several colors: darkbrown, silver, and grey (flat) while my curved ones are green, reddish brown, and blue.
On both types the positions of the posts are identical, near 11 and near 6.
Hope this may be of help withIMG_20210924_212151648~2.jpgIMG_20210924_212438915_HDR~3.jpg your projects, all the best
Don
 

Sam Lawrence

New member
Sherpa
Hi Don,

Thanks a lot for taking the photos and measurements! Hopefully, the post position is at least somewhat universal. Maybe the flat ones are for quartz movements. Anyway, I would like to purchase one or two if possible.

Thanks, Sam
 
Top